8 well-reviewed pcb board manufacturer in china in 2024

DIY 65% Keyboard, Bluetooth 5.0/2.4G Wireless, Replaceable MX Switch 5Pin/3Pin, ABS Shell, Metal Positioning Plate, Sound Insulation Mat, and CIY GK68 Dual Mode Wireless Hotswap Keyboard Kit (White)

Freely mix and match keycap switches with the CIY65% wireless keyboard kit's switch hot-swappable shaft base to create your own keyboard.

Two types of wireless: Two AAA batteries may operate for up to two months using the traditional dry battery life plan, Bluetooth 5.0, and 2.4G wireless technology while providing smart sleep power saving mode.

Hotswapping a switch Longer mating cycle life is provided by switches with hot-swappable shaft seats, an original design patent, and double-layer thick PCB panels.

The finest option for your DIY keyboard is the following top configuration: ABS one-piece shell, robust hardness, metal positioning plate, sandwich sound-proof silicone, bottom silencing cotton, and thick double-layer PCB panel.

Note: Make sure the switch is installed properly by...

GK61X PCB, YMDK GK61 GK61X RGB Hot Swap Independent Driver Wired Tyce-C

A new 61-wired PCB called the GK61x has a switch RGB and a Type C connector.

The underglow RGB stripe connector has been added to this PCB.

You can purchase and immediately plug in GK led stripe.

GK61xs support split 2.25u 2.75u space layouts as well as 6.25u space.

You can get ready to utilize GH60 size case plate.

To use together, create GH60 size case plates.

Only stabilizers installed on plates may be used with this PCB.

Mechanical Keyboard DIY Kit Case Plate PCB GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX

Case, Feet, Screws, GK61 Hot Swap PCB, Alu Plate, USB Cable, and Switch Removal Tool are all included in the package.

Please take note that the Fn key is the last key on the bottom and cannot be moved.

The PCB is fully programmable using GK software.

The chipset supports the full 16.8 million RGB colors and is a 32-bit MCU with 8M flash and 3 256*256*256 RGB drives.

The RGB presoldered on the PCB is under each switch.

Music can be supported via PCB RGB.

Switches are not included in the kit, however you can acquire Cherry Gateron Kailh SMD Box switches and other switches separately.

Switches can be added to the PCB without the need for additional soldering.

20 HiLetgo Universal Breadboard Test Prototype Boards 5x7cm Bakelite DIY Prototype Board PCB Superior for Arduino Experiments using DIY electronics

Price: $6.99
China wholesale Long PCB Manufacturer

DIY Universal Prototype PCB Board superior bakelite components All of the holes are in the centre of a flat surface.

Board made of 94HB Bakelite for prototyping

FR4 150x100mm 5.91x3.94 inch, 1.2mm Thickness Single-Sided Copper Clad Laminate PCB Circuit Board from uxcell 5 pieces of DIY Prototyping PCB Board with Name Board

Price: $11.49

Material: FR-4 Glass Fiber, Copper; Single-sided Layers.

Dimensions: 150x100mm/ 5.91x3.94 inches (L*W); approximate thickness: 1.2mm.

Excellent applications for creating PCB circuit boards and models.

widely used for maintenance, production, DIY experiments, and the development of new products.

Stable uses conductive tracks, pads, and other features etched from copper sheets laminated onto a non-conductive substrate to mechanically support and electrically link electronic components.

Note: To ensure that the carbon powder can be securely printed on the copper-clad laminate during transfer, the oxide layer on the surface of the copper-clad laminate needs to be sanded clear using fine sandpaper.

The board's surface should be polished bright and free of any noticeable stains.

12 Pieces of YUNGUI 50 x 100 mm 2-3 x 5 Joint Universal PCB Boards Single-sided copper prototype paper breadboard circuit strips

Price: $11.99

The product has a 50 x 100 mm size, a pitch of 2.54 mm, pore size of 1 mm, and is made of copper that is 1.3 mm thick.

The product is a strip circuit board with roughly 2 joints, 3 joints, and 5 joints, as well as a perforated board, which is a suitable assortment to meet your design requirements for DIY projects and electronic experiments.

Durable: Made of solid, 1.3mm-thick FR4 glass fiber material of the highest quality, it is strong and durable.

This board has plated-through-holes and is simple to solder; it won't pull off the PCB when soldering normally.

Circuit board for general-purpose analog and digital prototyping.

Our Promise: Effective service and quality assurance.

swift shipping We provide a 30-day money-back guarantee and an annual warranty.

Contacting us is always welcome if you...

Used in electrical and electronic fixtures, DIY projects, and crafts, Bopaodao Red Bakelite Phenolic Laminated Resin Flat Plate Board Sheet PCB, 8mm x 100mm x 150mm, 2Pcs

150 x 100 x 8mm, 2 pieces Material: Hot-pressed, phenol resin-greased, bleached wood pulp used to make phenol laminated sheet board.

Insulation, static electricity resistance, abrasion resistance, high temperature resistance, no water absorption, and high strength are all properties of bakelite.

We can supply full styles and additional sizes of Bakelite because we are a manufacturer seller.

Send us an message so we can provide a quote since we have a CNC machining center that can process it according to your specifications.

suitable for drilling pads, power distribution boxes, jig boards, mold plywood, high and low voltage wiring boxes, packaging machines, combs, and other items in the PCB industry.

For use with motors, mechanical molds, PCBs, and ICT fixtures.

Forming equipment, drilling equipment, a table...

180 x 120 x 2mm, 1 piece, Single Side Copper Clad PCB Laminate Circuit Board from Aoje-Link

Price: $9.74

180 x 120 x 2mm/7.09 x 4.72 x 0.08"(L*W*T), FR-4 Glass Fiber, Copper, Specification.

Application: Electronic circuit design, DIY electronics enthusiasts, teaching and training, and the production of handicrafts are the main uses.

Features: High-quality red copper plate and fiberglass board, exact etching circuit, close fit, good quality, no scratches, blisters, oxidation, falling off, etc.

, make this a perfect PCB substrate for hand-made or do-it-yourself circuits.

Corrosion resistance is a feature of the glass fiber board.

Drilling doesn't leave a burr on an etched circuit.

The copper surface is coated with insulating paint, which has strong adhesion, superior insulation performance, and is difficult to peel off.

The hole's roundness is very precise and difficult to distort.

Package includes one...

7 High-performance pcb stackup calculator in 2024

7 well-reviewed how to test pcb board with a multimeter in 2024