The basic principle of using laser cutting machine matters

Laser cutting technology plays an important role in medicine and many other industries. This cutting technology is far superior to other cutting methods because of its cutting speed and cutting strength. It can achieve many cutting effects that other cutting machines can't, and the cutting process is also very simple and convenient. It is precisely because of the performance of this cutting advantage that this technology has developed the latest cutting equipment-laser cutting machine. What is the working principle of this cutting machine? What are the precautions in process operation and use? Today, we will make a brief introduction on the specific working principle of this cutting machine.

Laser cutting power source laserpecker 2 pro.

The main power source of this cutting machine is laser. The laser used in this equipment is different from ordinary laser, and its laser power is a little higher, so the laser beam emitted is more penetrating laser cutter.

The working path of the laser cutter

After the laser beam passes through the corresponding laser system laserpecker 1, all these beams will be concentrated, the convergence rate is relatively large laser sharp, and then all the beams will be concentrated on the surface of the workpiece to be cut, the power of the laser will make the surface of the workpiece to a certain melting point, and then the high-pressure gas on the cutting machine will be cut out some of the remaining powder and other metal waste and blown away. The high-pressure gas on the cutting machine will blow away some of the remaining powder and other metal waste in the cutting process. As the laser moves through the parts, the workpiece and other parts are eventually cut to the desired size or shape.

Matters needing attention in using laser cutting machine

1. because the laser cutting machine is using the principle of laser, and this beam is a natural beam, if the laser emission power is not large enough, there is no way to cut the workpiece. So in the use of the process, must ensure that the use of mechanical power to maintain a normal state.

2. Because the laser beam also has certain radiation, the staff must strictly follow the operating instructions and take corresponding protective measures during the operation. Only in this way can the whole laser cutting process be successfully completed.

3.These are the basic principles of laser cutting machine, using any cutting machine has a certain degree of danger, especially this high-tech cutting machine in the use of the process must strictly protect the safety of the operator, moreover, the machine must be maintained regularly to ensure the service life of the precision instrument and the final cutting effect.