Ten common problems with laser engraving

Ten common problems with laser engraving

In the laser engraving industry, both businesses and DIY enthusiasts face various social challenges as they use this technology for long-term development. When working with different materials, individuals may have varying understandings of the appropriate working parameters and management practices for laser engraving. To achieve desired results,laserpecker pro 2 is important to address these differences. To assist with this, we have compiled a list of the top ten common issues faced in laser engraving. This will provide advice for those experiencing difficulties with materials and machinery that may not be available through national resources.

What are some suggestions for engraving solid wood and hardwood?

For hardwood engraving, we recommend covering the wood's surface so that residue does not penetrate into the engraved area.

Use the "bottom-up" engraving mode. In our laser software, RDwork, you can change the laser head's working mode so you can engrave from the bottom to the top instead of from top to bottom as usual. By moving the laser head, smoke and debris can be reduced in the engraving field.

If you burn the hardwood's gum at high temperatures, the gum will turn black when you're done engraving.

2. Can we engrave glass? What are the tips?

While you may think you need better and more expensive glass to get better results, this isn't true. We have many customers who use wholesaler glassware for engraving, and the results are excellent as well.

You can get some advice on engraving glass from us.

To get better results, use a lower resolution, such as 300 DPI;

The black color in the graphic should be changed to 80% black to improve engraving quality.

You can use a wet paper towel to dissipate the heat from the glass and improve the quality of your engraving work, but be careful not to cause creases in this paper.

Applying a thin laserpecker laser engraver of soap to the area to be engraved will also help dissipate heat;

Sand the engraved area with ScotchBrite or a similar item to remove glass shards.

When engraving on plywood (plywood) or balsa wood, what should I keep in mind?

As plywood can have uneven grains and different layers of glue, it is better suited for cutting than carving. laserpecker 1 pro material is important when you want to carve on it, unevenness, or too much or too little glue can affect the carving. However, if you find better plywood, you can still achieve great results, like wood carving.

Would it be difficult to expand my business activities to China leather?

With laser engraving or leather cutting, we have many customers in this industry who want to customize wallets, handbags with logos.

How should artificial leather be engraved?

If in doubt, you can start your own tests at relatively high speeds and low power consumption. It depends on your machine and wattage, but you can download Raytheon laser's laser parameter table. As long as you don't move the material, you can engrave it again until you get the desired results.

I hate wasting materials. Can a laser engraver use scrap material?

The idea of using scrap material is a very good one. Students can not only use scrap material to create new projects, but they can also use scrap material to test results for more challenging engravings, like photographs, as well. It has been quite impressive to see how many businesses in China are utilizing scrap material to make a wide variety of items, such as small acrylic illuminated signs, ornaments, labels, and so on.

Article recommended